Cuetec AVID Era 6PT LW, Grey, 3/8x14

5.490,-

Inspired by our past, engineered to make history Owing its lineage to the traditional “sneaky-pete” styled cues made famous by early American hustlers, AVID Era cues are anything but traditional. Crafted of A grade kiln-dried, vacuum-sealed hard maple and equipped with the all-new AVID glass bonded maple low-deflection shaft, AVID Era cues were engineered to leave their mark on the game by providing players with the technology and performance required to recognize their potential today and any years down the line. Shaft: AVID 12.75 / 12.25 / 11.75 mm Low-Deflection Shaft Super Straight Taper Tiger® Everest Laminated Tip Butt: Kiln dried vacuum-sealed Canadian Maple 3/8 "x 14" Joint (21,30 mm) Six points with creme and blue veneers over gray stained maple Fused creme butt cap, ring, and collar Black with white spec Irish linen wrap Duo Smart Extension Ready Bumper (available July 2021) Acueweight generation II adjustment system CT logo joint protectors Further information: Cuetec Cleansing Wipes (5X) AVID CARE & MAINTENANCE Maintaining the Cuetec AVID shaft’s finish. Cuetec AVID shafts must never be sanded or modified. Using any abrasive on the surface of the shaft will damage the shaft’s finish and possibly weaken the shaft’s glass composite bonding layers and discharge potentially harmful materials that could be hazardous to your health. Any polishing, sanding or treatment of the surface of the shaft with abrasives or chemicals of any kind will void the shaft’s warranty. Never use baby powder, hand chalk, talcum powder or other shaft treatments on a Cuetec AVID shaft. To clean the surface of your Cuetec AVID shaft, you will need just a few materials; Isopropyl Alcohol (75% or higher) and two (2) clean and debris-free soft cloth towels. Step 1. Remove any dust and debris by wiping the shaft with a soft clean cloth. Step 2. Apply a reasonable amount of Isopropyl Alcohol (75% or higher) to a clean, soft cloth towel. Next, work the towel up and down the length of the shaft, while rotating your hand around its circumference. It is possible that dirt will be visible on the towel. This is completely normal. Continue working the shaft with the same motion until all areas have been thoroughly wiped, then allow a few moments for the surface to dry. Changing the tip on your Cuetec AVID Shaft. Cuetec AVID shafts feature a light-weight white sighting ferrule. This inclusion to AVID shaft’s front-end construction allows for easier tip replacement over the life of the shaft. When changing the tip, it is important to clean and resurface the ferrule. The minimum height of the ferrule must be greater than 2mm to maintain the shaft’s warranty coverage. * Always use a recognized and proven cuesmith. Never allow a cuesmith to sand or modify the shaft’s finish when installing a new tip. Replacing the ferrule on your Cuetec AVID Shaft. While unlikely, should the ferrule on your Cuetec AVID shaft ever need to be replaced, it must be done by an authorized Cuetec repair center. This is required due to the complex nature of the bonding agents used and to ensure that no damage is done to the shaft’s glass composite bonding layers. To locate an authorized repair center near you, contact customerservice@cuetec.com. Adjusting an AVID Cue’s weight Cuetec AVID cues utilize a cartridge based weight system. To adjust the weight of your cue. Remove the bumper using a 10mm hex wrench key. After the bumper has been removed, insert a Phillips head screwdriver into the butt, turning it to the left to remove any installed weights. Cuetec Acueweights are available in .25 .oz, .05 .oz, and 1.0 .oz, increments. Warpage Cuetec AVID shafts feature a limited-lifetime warranty against warpage. Abuse Cuetec AVID shafts are not engineered to tolerate considerable lateral pressure. They should never be flexed excessively, hit on other objects or treated with any abrasives, whether they are solid or liquid. Shaft Diameter Cuetec AVID shaft diameters should never be modified. Any sanding, polishing or abrasive treatment could jeopardize the ultra-thin glass bonding surface layer and immediately void the AVID shaft’s warranty.

Cuetec Cynergy CT-15K Carbon, Sapphire-Blue, ...

10.490,-

Cuetec Cynergy CT-15K Carbon, Sapphire-Blue, 3/8x14, 12.5mm

Cuetec Cynergy CT-15K Carbon, walnut, 3/8x14 ...

12.990,-

Cuetec Cynergy CT-15K Carbon, walnut, 3/8x14 12,5mm

Cuetec Cynergy Nineball Black LTW, 3/8x14

10.990,-

POWERED BY CUETEC, INSPIRED BY MATCHROOM. Unleash tour-level performance with the Nineball Series — the cue where Cuetec innovation meets Matchroom intensity. Engineered for the biggest moments in professional 9-ball, this cue blends cutting-edge technology with the spirit of the sport’s most electrifying stages. Each cue is paired with the world-renowned carbon fiber Cynergy shaft, a Duo Extension-ready bumper, and the Acueweight Gen II weight adjustment system. 7 Point Design Featuring Nineball® Diamond Logo Stainless Steel Precision Cut Spot Rings Butt made from A+ grade kiln-dried Canadian maple core Clear-Tec® Epoxy Resin Finish Genuine Pebbled Full-Grain Leather Wrap Cuetec Acueweight Generation II weight adjustment system Duo Extension Ready Bumper CT Joint Protectors Cuetec Shaft Cleansing Wipes   SUPERIOR CONSTRUCTION: MULTI-DIRECTIONAL CARBON FIBER Cuetec’s Cynergy carbon composite shafts are constructed with multi-plies of resin-impregnated military-grade unidirectional carbon fiber filaments. The diameter of each filament is 7 um(0.007 mm), or about one-twelfth of a human hair. The orientation of these carbon fiber filaments is crucial to achieving optimal durability, strength, and performance. During the heat curing process each of these specifically oriented filaments works together to ensure there is zero net displacement. The result is a perfectly straight and ultra-strong shaft. POLYURETHANE FOAM CORE At the heart of each Cynergy carbon composite shaft is its ultra-high-density polyurethane foam core. This Cuetec proprietary poly-foam core ads stability to the shaft, allowing for prescribed flex and creating a more wood-like sound upon contact with increased feel and feedback. FLYWEIGHT FRONT-END CONSTRUCTION Less weight means less deflection. Benefiting from their ultra-strong carbon composite construction, each Cynergy shaft features Cuetec’s flyweight front-end build. This construction allows the Cynergy poly-foam to stop five inches below the tip, creating a rigid cavity with less mass and therefore less deflection on contact. PRECISION-ENGINEERED TAPERS Developed to provide the most comfortable playing experiences, each Cuetec Cynergy shaft features a unique performance-oriented taper. Both the Cynergy 12.5 and 11.8 feature super straight tapers with virtually zero rise - allowing for a more level and precise stroke, regardless of the player’s stroke length. In contrast, the Cynergy 10.5 features a hybrid-conical taper - providing increased stiffness and power, for other cue sports including Snooker and Chinese 8-Ball.  THIN WHITE SIGHTING FERRULE At only .25 inches long, the light-weight, thin white sighting ferrule on each Cynergy shaft not only aids in aim contrast and depth perception, but it also provides a more familiar and stable platform for tip maintenance and replacement over the life of the shaft. LAMINATED TIGER® SNIPER TIP Selected for its high-performance and neutral hit attributes, each Cynergy shaft is paired with a laminated Sniper tip. Naturally cured for more than a year, each Sniper tip is meticulously honed, utilizing a unique vacuum lamination process that ensures the elimination of air between the tip’s ten layers.  

Cuetec Cynergy Nineball Blue Stain LTW, 3/8x14

10.990,-

POWERED BY CUETEC, INSPIRED BY MATCHROOM. Unleash tour-level performance with the Nineball Series — the cue where Cuetec innovation meets Matchroom intensity. Engineered for the biggest moments in professional 9-ball, this cue blends cutting-edge technology with the spirit of the sport’s most electrifying stages. Each cue is paired with the world-renowned carbon fiber Cynergy shaft, a Duo Extension-ready bumper, and the Acueweight Gen II weight adjustment system. 7 Point Design Featuring Nineball® Diamond Logo Stainless Steel Precision Cut Spot Rings Butt made from A+ grade kiln-dried Canadian maple core Clear-Tec® Epoxy Resin Finish Genuine Pebbled Full-Grain Leather Wrap Cuetec Acueweight Generation II weight adjustment system Duo Extension Ready Bumper CT Joint Protectors Cuetec Shaft Cleansing Wipes   SUPERIOR CONSTRUCTION: MULTI-DIRECTIONAL CARBON FIBER Cuetec’s Cynergy carbon composite shafts are constructed with multi-plies of resin-impregnated military-grade unidirectional carbon fiber filaments. The diameter of each filament is 7 um(0.007 mm), or about one-twelfth of a human hair. The orientation of these carbon fiber filaments is crucial to achieving optimal durability, strength, and performance. During the heat curing process each of these specifically oriented filaments works together to ensure there is zero net displacement. The result is a perfectly straight and ultra-strong shaft. POLYURETHANE FOAM CORE At the heart of each Cynergy carbon composite shaft is its ultra-high-density polyurethane foam core. This Cuetec proprietary poly-foam core ads stability to the shaft, allowing for prescribed flex and creating a more wood-like sound upon contact with increased feel and feedback. FLYWEIGHT FRONT-END CONSTRUCTION Less weight means less deflection. Benefiting from their ultra-strong carbon composite construction, each Cynergy shaft features Cuetec’s flyweight front-end build. This construction allows the Cynergy poly-foam to stop five inches below the tip, creating a rigid cavity with less mass and therefore less deflection on contact. PRECISION-ENGINEERED TAPERS Developed to provide the most comfortable playing experiences, each Cuetec Cynergy shaft features a unique performance-oriented taper. Both the Cynergy 12.5 and 11.8 feature super straight tapers with virtually zero rise - allowing for a more level and precise stroke, regardless of the player’s stroke length. In contrast, the Cynergy 10.5 features a hybrid-conical taper - providing increased stiffness and power, for other cue sports including Snooker and Chinese 8-Ball.  THIN WHITE SIGHTING FERRULE At only .25 inches long, the light-weight, thin white sighting ferrule on each Cynergy shaft not only aids in aim contrast and depth perception, but it also provides a more familiar and stable platform for tip maintenance and replacement over the life of the shaft. LAMINATED TIGER® SNIPER TIP Selected for its high-performance and neutral hit attributes, each Cynergy shaft is paired with a laminated Sniper tip. Naturally cured for more than a year, each Sniper tip is meticulously honed, utilizing a unique vacuum lamination process that ensures the elimination of air between the tip’s ten layers.  

Cuetec Cynergy Nineball Shark Gray Stain LTW, ...

10.990,-

POWERED BY CUETEC, INSPIRED BY MATCHROOM. Unleash tour-level performance with the Nineball Series — the cue where Cuetec innovation meets Matchroom intensity. Engineered for the biggest moments in professional 9-ball, this cue blends cutting-edge technology with the spirit of the sport’s most electrifying stages. Each cue is paired with the world-renowned carbon fiber Cynergy shaft, a Duo Extension-ready bumper, and the Acueweight Gen II weight adjustment system. 7 Point Design Featuring Nineball® Diamond Logo Stainless Steel Precision Cut Spot Rings Butt made from A+ grade kiln-dried Canadian maple core Clear-Tec® Epoxy Resin Finish Genuine Pebbled Full-Grain Leather Wrap Cuetec Acueweight Generation II weight adjustment system Duo Extension Ready Bumper CT Joint Protectors Cuetec Shaft Cleansing Wipes   SUPERIOR CONSTRUCTION: MULTI-DIRECTIONAL CARBON FIBER Cuetec’s Cynergy carbon composite shafts are constructed with multi-plies of resin-impregnated military-grade unidirectional carbon fiber filaments. The diameter of each filament is 7 um(0.007 mm), or about one-twelfth of a human hair. The orientation of these carbon fiber filaments is crucial to achieving optimal durability, strength, and performance. During the heat curing process each of these specifically oriented filaments works together to ensure there is zero net displacement. The result is a perfectly straight and ultra-strong shaft. POLYURETHANE FOAM CORE At the heart of each Cynergy carbon composite shaft is its ultra-high-density polyurethane foam core. This Cuetec proprietary poly-foam core ads stability to the shaft, allowing for prescribed flex and creating a more wood-like sound upon contact with increased feel and feedback. FLYWEIGHT FRONT-END CONSTRUCTION Less weight means less deflection. Benefiting from their ultra-strong carbon composite construction, each Cynergy shaft features Cuetec’s flyweight front-end build. This construction allows the Cynergy poly-foam to stop five inches below the tip, creating a rigid cavity with less mass and therefore less deflection on contact. PRECISION-ENGINEERED TAPERS Developed to provide the most comfortable playing experiences, each Cuetec Cynergy shaft features a unique performance-oriented taper. Both the Cynergy 12.5 and 11.8 feature super straight tapers with virtually zero rise - allowing for a more level and precise stroke, regardless of the player’s stroke length. In contrast, the Cynergy 10.5 features a hybrid-conical taper - providing increased stiffness and power, for other cue sports including Snooker and Chinese 8-Ball.  THIN WHITE SIGHTING FERRULE At only .25 inches long, the light-weight, thin white sighting ferrule on each Cynergy shaft not only aids in aim contrast and depth perception, but it also provides a more familiar and stable platform for tip maintenance and replacement over the life of the shaft. LAMINATED TIGER® SNIPER TIP Selected for its high-performance and neutral hit attributes, each Cynergy shaft is paired with a laminated Sniper tip. Naturally cured for more than a year, each Sniper tip is meticulously honed, utilizing a unique vacuum lamination process that ensures the elimination of air between the tip’s ten layers.  

Cuetec Cynergy SVB Gen2, Black LTW, 3/8x14

13.990,-

PLAY LIKE A LEGEND Completely reimagined and refined from top to bottom, the second generation of the Cynergy SVB Series Cues has arrived. Designed and developed under the explicit direction of the Hall-of-Famer Shane van Boening, these cues perform even better than they look. Key series updates include a relocated A-joint, a Clear-Tec® epoxy resin finish, and a full-grain, pebbled leather wrap that seamlessly extends to the butt cap. Precision-cut rings inlaid with genuine Abalone accent the shortened ten-point crown inspired design — a fitting tribute to the undisputed King of American Pool. 10 Point Crown design featuring synthetic Abalone Silver precision cut rings with inlaid genuine Abalone A+ grade Kiln dried Canadian Maple core Clear-Tec® epoxy resin finish Genuine Pebbled Full-Grain Leather Wrap Cuetec Acueweight Generation II System Duo Extension Ready Bumper CT Joint Protectors Cuetec Shaft Cleaning Wipes 3/8×14 Cuetec Joint (21.30mm) Tiger® Sniper Laminated Tip, 12,5 mm Standard Cue & Shaft Weight: ~19oz Standard Shaft Weight: ~3.8oz Standard Butt Length 29" Standard Shaft Length: 29”

Cuetec Cynergy SVB Gen2, Gray LTW, 3/8x14

13.990,-

PLAY LIKE A LEGEND Completely reimagined and refined from top to bottom, the second generation of the Cynergy SVB Series Cues has arrived. Designed and developed under the explicit direction of the Hall-of-Famer Shane van Boening, these cues perform even better than they look. Key series updates include a relocated A-joint, a Clear-Tec® epoxy resin finish, and a full-grain, pebbled leather wrap that seamlessly extends to the butt cap. Precision-cut rings inlaid with genuine Abalone accent the shortened ten-point crown inspired design — a fitting tribute to the undisputed King of American Pool. 10 Point Crown design featuring synthetic Abalone Silver precision cut rings with inlaid genuine Abalone A+ grade Kiln dried Canadian Maple core Clear-Tec® epoxy resin finish Genuine Pebbled Full-Grain Leather Wrap Cuetec Acueweight Generation II System Duo Extension Ready Bumper CT Joint Protectors Cuetec Shaft Cleaning Wipes 3/8×14 Cuetec Joint (21.30mm) Tiger® Sniper Laminated Tip, 12,5 mm Standard Cue & Shaft Weight: ~19oz Standard Shaft Weight: ~3.8oz Standard Butt Length 29" Standard Shaft Length: 29” Extension is not included in the scope of delivery

Cuetec Cynergy SVB Gen2, White LTW, 3/8x14

13.990,-

PLAY LIKE A LEGEND Completely reimagined and refined from top to bottom, the second generation of the Cynergy SVB Series Cues has arrived. Designed and developed under the explicit direction of the Hall-of-Famer Shane van Boening, these cues perform even better than they look. Key series updates include a relocated A-joint, a Clear-Tec® epoxy resin finish, and a full-grain, pebbled leather wrap that seamlessly extends to the butt cap. Precision-cut rings inlaid with genuine Abalone accent the shortened ten-point crown inspired design — a fitting tribute to the undisputed King of American Pool. 10 Point Crown design featuring synthetic Abalone Silver precision cut rings with inlaid genuine Abalone A+ grade Kiln dried Canadian Maple core Clear-Tec® epoxy resin finish Genuine Pebbled Full-Grain Leather Wrap Cuetec Acueweight Generation II System Duo Extension Ready Bumper CT Joint Protectors Cuetec Shaft Cleaning Wipes 3/8×14 Cuetec Joint (21.30mm) Tiger® Sniper Laminated Tip, 12,5 mm Standard Cue & Shaft Weight: ~19oz Standard Shaft Weight: ~3.8oz Standard Butt Length 29" Standard Shaft Length: 29”

Cuetec Cynergy Truewood Gen 2, ebony II LTW, ...

13.990,-

Cuetec Cynergy Truewood Gen 2, ebony II LTW, 3/8x14, 12.5mm

Cuetec Cynergy Truewood Gen 2, leopard I NW, ...

13.990,-

Cuetec Cynergy Truewood Gen 2, leopard I NW, 3/8x14, 12.5mm

Cuetec Cynergy Truewood Gen 2, leopard II LTW, ...

13.990,-

RUN RINGS AROUND THE COMPETITION. The Cuetec evolution continues with the next generation of Cynergy Truewood Series Cues. Featuring an all-new construction utilizing Cuetec’s Clear-Tec epoxy resin finish for increased stiffness and reduced vibration, every Truewood series cue is enveloped in exotic veneers surrounding a kiln-dried Canadian Maple core and is adorned with precision cut Truewood Shield rings. Available with the “Player’s Choice” of Cynergy 11.8 or 12.5 carbon fiber composite shaft, each Truewood Cue delivers unparalleled hit consistency and feedback. Highly figured Truewood Leopard Wood Veneer Genuine Pebbled Full-Grain Leather Wrap A+ grade kiln-dried Canadian Maple Core Silver Shield Rings with Creme Accent Rings Clear-Tec® Epoxy Resin Finish Cuetec Acueweight Generation II Duo Extension Ready Bumper CT Joint Protectors Cuetec Shaft Cleansing Wipes

Cuetec Cynergy Truewood Gen 2, Mappa Burl II LTW ...

13.990,-

Tip : Tiger Sniper Ferrule : 1/4" Thin White Sighting Ferrule Shaft : 29" Carbon composite shaft, 15.5" SST (Super Slim Taper) Pin : 3/8 x 14 - 21.3mm Collar : 1.5mm Black phenolic Forearm : Mappa Burl Veneer Wrap : Genuine Pebbled Full-Grain Leather Wrap Butt Sleeve : Mappa Burl Veneer with silver shield rings Butt Plate : Stainless steel with Cuetec Truewood logo Bumper : Cuetec Duo extension ready bumper - BUMPCTE Additional Information Includes Cleaning Wipes Cuetec Acueweight Gen II This cue is weight changeable  This cue does come with joint protectors. This cue does not come with an extension. This cue does come with a case. Warranty : Limited Manufacturer

Ny

Cuetec Cynergy Truewood Gen 2, Sycamore II LTW, ...

14.490,-

RUN RINGS AROUND THE COMPETITION. The Cuetec evolution continues with the next generation of Cynergy Truewood Series Cues. Featuring an all-new construction utilizing Cuetec’s Clear-Tec epoxy resin finish for increased stiffness and reduced vibration, every Truewood series cue is enveloped in exotic veneers surrounding a kiln-dried Canadian Maple core and is adorned with precision cut Truewood Shield rings. Available with the “Player’s Choice” of Cynergy 11.8 or 12.5 carbon fiber composite shaft, each Truewood Cue delivers unparalleled hit consistency and feedback. Highly figured Truewood Sycamore Veneer Genuine Pebbled Full-Grain Leather Wrap A+ grade kiln-dried Canadian Maple Core Silver Shield Rings with Creme Accent Rings Clear-Tec® Epoxy Resin Finish Cuetec Acueweight Generation II Duo Extension Ready Bumper Extension is not included in the delivery CT Joint Protectors

Cuetec Cynergy Truewood Gen 2, walnut II NW, ...

13.990,-

Cuetec Cynergy Truewood Gen 2, walnut II NW, 3/8x14, 12.5mm

Cuetec Denali, Brown, 3/8x14

3.990,-

EXTREMLY POPULAR, STYLISH AND AFFORDABLE This Denali Cue features a Euro Blue 4 prong design with silver laser trims on the forearm. The prongs are outlined with a thick black border and connected to an oval shaped graphic overlay of the same pattern. The same oval shaped graphic overlay is on the butt sleeve. The background is a light mahogany colour. The Veltex grip, a polished chrome joint collar and butt cap are surrounded by black rings. Cuetec Denali Cues feature a Tiger Everest ten-layer Pigskin tip with a red replacement indicator layer. They are equipped with a Polycarbonate ferrule for impact absorption and have a Super Slim Taper (S.S.T.) shaft. The 15 ½” pro taper features the popular Cuetec-Tru-Glide finish for an ultra-smooth comfortable stroke. Clear fiberglass is bonded to A-Grade North American Maple - tough against warps, dents, dings, and scratches. Stainless Steel accents with a Hardwood butt featuring Cuetec’s famous Veltex wrap for a sure grip with traditional four prong designs and beautiful stains all at prices everyone can afford. The Acueweight weight adjustment system makes it easy to customize the weight and balance. Simply unscrew the chrome butt cap with bumper attached (do not remove the bumper) to adjust weight and balance with a flat or Phillips’s head screwdriver. Weights are available in ½ and 1-ounce increments (sold separately). Shaft: S.S.T. shaft with fiberglass bonded to Maple (20,00 mm) 15 ½” pro taper 13mm Tiger Everest ten-layer Pigskin tip Polycarbonate ferrule Tru-Glide finish  Butt: 3/8″ x 14″ joint (20,00 mm) Stainless Steel joint collar, trim rings, and butt cap Veltex wrap for sure grip Hardwood butt with classic design Durable rubber bumper Acueweight adjustable Accepts the 6” Cuetec Smart Extension  Further Information: Overall Length: 147cm (58″)